Opranic A70R quiet pedestal fan with remote

Design and two height configurations

The A70R has a slim pedestal and circular head, in Anthracite, White and Black.

The full-height configuration stands approximately 115 cm tall for floor placement. Without the pedestal pole, the fan body connects directly to the base for a shorter configuration of approximately 70 cm, suitable for use beside a desk or on a sideboard.

Brushless DC motor and precise speed control

The electronically controlled motor allows small adjustments to airflow. Start low for close-range use and increase the speed for a stronger breeze or a more distant position.

Maximum fan power is 25 W. Actual consumption depends on the selected speed and active functions. The fan runs on low-voltage DC through the supplied mains adaptor, or a compatible external power source.

Three-dimensional oscillation

The oscillation control has three movement modes: body movement, head movement, or both together. Press it again to stop oscillation and direct the airflow towards one position.

Body movement sweeps the air from side to side; head movement changes its direction through the room. Combined movement distributes airflow across a seating area. Leave clearance for the complete movement and keep curtains and loose furnishings away from the grille.

Normal, nature and sleep modes

Normal mode maintains your chosen speed for consistent airflow.

Nature mode varies the speed, making the airflow strengthen and soften during use.

Sleep mode changes the speed in successive waves, with the stronger airflow gradually reducing over time. Each cycle can become faster and more audible, then slower and quieter. For steady low airflow throughout the night, select a low speed in normal mode.

Control from your seat

The touch panel and supplied remote have the same functions: power, speed, movement, mode, timer and ioniser. Use the remote from your seat, or the touch panel on the fan.

The switch-off timer stops the fan after the selected period, independently of sleep mode. When a timer is set, the display briefly alternates between the selected speed and time.

Switchable ionisation

The integrated ioniser releases negative ions when enabled and operates only while the fan runs. It has a separate on/off control; airflow functions remain available with ionisation switched off.

Placement indoors and outdoors

In a bedroom, start with low airflow directed above the mattress. In a living room, use combined oscillation across the seating area. Beside a desk, direct the airflow so papers and loose items remain undisturbed.

On a patio or balcony, or in the garden, use a compatible power bank in dry conditions and bring the fan indoors after use. The A70R is also suitable for shops and waiting areas.

Use a firm, level surface with at least 50 cm of free space around the fan. In the shorter configuration, the surface must support the complete base.

Assembly and care

Assemble and clean the fan with the power disconnected. Wait for the blades to stop before cleaning. Follow the assembly, grille removal, cleaning and storage instructions in the user manual. Arrange electrical repairs and internal servicing through Opranic or your retailer.

Five-year warranty and support

The five-year warranty covers the motor, electronics, remote control and mains adaptor under normal use. It applies to all listed colour and plug variants, including business purchases.

Keep your proof of purchase and contact your retailer or Opranic for support. Documentation is available at opranic.com/doc. Full warranty terms apply; the warranty does not affect your statutory rights.