Opranic PRO V70R Patio Heater, Wall and Ceiling Mounted, with Remote Control
€359 incl. VAT.
The Opranic PRO V70R is a wall or ceiling-mounted patio heater for terraces at home, restaurants and hotels. Adjust the warmth by remote control, and use Auto-restart mode for installations with central switching. Available in Jet Black or Cloud White.
- IR-X Carbon Black™ heating technology with a Pro reflector
- Long-range remote control and five heat settings, up to 2300 W
- Automatic switch-off timer, adjustable from 1 to 9 hours
- Selectable Auto-restart mode
- Aluminium housing, stainless steel grille and IP65 protection
- Five-year warranty
Patio warmth with remote control
The Opranic PRO V70R brings adjustable infrared warmth to restaurant terraces, hotel courtyards and patios at home. Wall or ceiling mounting keeps the floor clear, while the remote control lets you adjust the heat as the evening cools. For installations with several heaters, Auto-restart mode allows central switching.
Warmth in seconds
The IR-X Carbon Black™ element reaches full output in three to five seconds. Its peak wavelength is 2.2 µm, and the Pro parabolic reflector directs radiant heat towards the seating area. The element has a rated service life of up to approximately 12,000 hours.
Control from your seat
Choose from five heat settings, from 920 W to 2300 W, using the long-range remote control or the controls on the heater. Set the timer to switch the heater off automatically after 1 to 9 hours. The warmth you feel depends on mounting height, your distance from the heater, the air temperature and the wind.
Auto-restart mode for central switching
Auto-restart mode is designed for patios with several heaters controlled from one wall switch, timer or contactor. Once enabled on each heater, every unit that was heating when the power was cut resumes at its last level when the power returns. The mode is off as delivered; the V-Line user manual (PDF) describes how to enable it with the remote control. A power cut resets a running timer.
Enable or disable Auto-restart
- Put the heater in standby. Wait until the display shows two dashes:
--. - Point the remote at the receiver and press the following buttons in order:
Max → P+ → P- → Max - Read the displayed setting:
r1means Auto-restart is on, the heater resumes at its last power level when the supply returns;r0means it is off, the heater starts in standby. Each complete sequence changes the setting. No separate save step is needed.
Warning: when Auto-restart mode is enabled, heating resumes at the last selected power level when the electricity supply returns. Keep the area in front of the heater clear even while the supply is off.
Recommendation: use Auto-restart mode only with an external timer that cuts the power to the connected heaters, or a central on/off switch that cuts the power whenever nobody is present. This reduces the risk of heaters operating unattended. The built-in timer and the standby function on the remote control do not disconnect the electricity supply.
Built for demanding environments
The powder-coated aluminium housing has painted end covers, a brushed 18/8 stainless steel grille and stainless steel screws. Its IP65 rating protects against dust and water jets, so the heater can remain mounted outdoors throughout the year. Choose Jet Black or Cloud White.
Choosing a heater for your space
The PRO V70R suits restaurant and café terraces, hotel courtyards, rooftop seating areas, pergolas and covered outdoor dining spaces. As a guide, one heater serves approximately 6 to 11 m² when mounted 1.8 to 2.5 m above the floor, at an outdoor temperature of around 10 °C. Exposed sites may need more heating power; a roof and side walls help shelter the seating area.
If you prefer a fixed output with a simple on/off switch, consider the Opranic PRO V70.
Mounting and minimum clearances
Mount the heater 1.8 to 2.5 m above the floor, above head height and out of reach of children. Angle it 30 to 45 degrees towards the seating area. Keep curtains and other textiles out of the path of the heat, and maintain the minimum clearances below.
| Direction | Minimum clearance |
|---|---|
| In front, in the direction the heater is aimed | 100 cm |
| Sides and underside, to combustible material | 70 cm |
| Walls outside the beam | 30 cm |
| Wall behind the heater | 10 cm |
A 2300 W heater draws 10 A. Use one heater per circuit and an RCD-protected socket outdoors. Check that the 1.9 m cable reaches the socket from your chosen mounting position. Two heaters facing each other across a table can help distribute the warmth more evenly.
Running cost
At full power, the PRO V70R uses 2.3 kWh of electricity in one hour. At €0.38/kWh, that costs around €0.87 per hour. Lower heat settings use proportionally less electricity. The gas comparison below gives an illustrative example for a larger installation.
Five-year warranty
The PRO V70R comes with a five-year warranty on the heater and its electronics under normal use. The heating tube is covered for two years. Full terms are set out in the user manual.
Use in conservatories and enclosed rooms
Ecodesign Regulation (EU) 2024/1103 sets requirements for electric heaters used in enclosed rooms, including electronic room temperature control with a weekly timer and open-window detection. The Opranic PRO V70R is designed for outdoor use, including covered terraces, pergolas and open conservatories. For enclosed rooms, operate it through a room thermostat that provides these functions, or choose the Opranic S50R or S70R, which meet the requirements of the regulation for portable radiant heaters.
Technical specifications
| Specification | Opranic PRO V70R |
|---|---|
| Maximum output | 2300 W |
| Heat settings | 920 / 1265 / 1610 / 1955 / 2300 W |
| Heating technology | IR-X Carbon Black, peak 2.2 µm |
| Reflector | Pro, parabolic |
| Grille | Brushed stainless steel 18/8 |
| Housing | Powder-coated aluminium, painted side covers, stainless screws |
| Colours | Jet Black, Cloud White |
| Control | Long-range remote control and on-unit controls |
| Timer | 1–9 hours |
| Auto-restart mode | Yes, selectable; off as delivered |
| IP rating | IP65 |
| Power supply | 230 V AC, 50 Hz, 10 A |
| Power cable | 1.9 m with plug |
| Dimensions (W × H × D) | 91.5 × 19.5 × 9 cm |
| Net weight | 3.4 kg |
| Mounting | Wall or ceiling, adjustable angle bracket supplied |
| Mounting height | 1.8–2.5 m, angled 30–45° towards the seating area |
| Indicative seating area* | 6–11 m² |
| Heating element life | Up to approx. 12,000 hours |
| Intended use | Outdoor, covered terraces and open conservatories (see note) |
| Warranty | 5 years, heating tube 2 years |
*Guide value for a seating area at 1.8 to 2.5 m mounting height and approximately 10 °C outdoors. Wind and open sides increase the requirement; a roof and side walls reduce it.
Included in the box
- PRO V70R heater with wall and ceiling bracket
- Remote control
- Mounting hardware
- User manual in English, Swedish, German, French and Spanish
Optional accessories
- Weather cover in black: WALLCOVER-B
- Replacement remote control: OS-REMOTE70
Accessories are sold separately. Allow the heater to cool fully before fitting a cover.
Documents
Download the V-Line user manual and view the product catalogue at opranic.com/doc.
Running cost: electric compared with gas
1× PRO V70R electric (2.3 kW)
1× Gas mushroom heater (~12 kW)
For illustration, compare five PRO V70R heaters, spaced 3 m apart on a 60 m² terrace, with four freestanding gas patio heaters. At the example prices used here, the electric heaters cost around €4.37 per hour in total; the gas heaters cost €9.60 per hour. The number of heaters needed depends on the layout, exposure and desired warmth.
The chart compares the fuel or electricity cost of running one heater at the stated output. It does not establish equal heating coverage. When planning a terrace, consider where people will sit, the mounting positions, wind exposure and the heat each model can deliver to those seats.
Multiply the heater’s power in kW by your electricity price per kWh, then by the number of operating hours. For several heaters, add their power together. The figures shown here use the example prices below.
Illustrative prices: electricity €0.38/kWh and propane €2.55/kg. The comparison uses one PRO V70R at 2.3 kW and one gas patio heater at approximately 12 kW with a consumption of 0.94 kg/h. This gives approximately €0.87 and €2.40 per hour respectively. Bar heights show the relative hourly costs, with gas set to 100%. Actual costs vary with local prices and the selected power level.
Frequently asked questions
For answers to common questions about infrared heating, installation and using your heater, visit our infrared heating FAQ.
Verified Amazon Reviews

Opranic P5 Metal Infrared Panel Heater, Wall and Ceiling Mounted, 300 to 900 W
The Opranic P5 is a slim metal infrared panel heater with a textured steel front, designed for homes and workplaces.

Opranic S70R Freestanding Outdoor Heater with Remote Control, 2300 W
The Opranic S70R is a freestanding outdoor heater for patios, terraces and conservatories.

Opranic V50R Infrared Patio Heater with Remote Control, Wall and Ceiling Mounted, 2300 W
Enjoy your patio for longer with the Opranic V50R infrared patio heater.

Opranic P6 Hybrid Infrared Wall Heater with Built-in Thermostat, 550 W and 900 W
The Opranic P6 Hybrid infrared wall heater combines radiant warmth with gentle convection in a slim, white panel.













